How the clip-in aluminum ceiling tiles manufactured

Author : admin

Update time : 2020-08-10 15:47:40

Aluminum ceiling tiles specifically aluminum ceiling tiles are very popular to be applied to public projects. Nowadays, for its modern effect, easy to clean, and waterproof, higher fire rating to other ceiling products, they are wildly installed in office area at many companies. Someone may be curious to know how this aluminum ceiling tiles were made manufacturing factory.

This article will explain and show you the process on how this product are manufactured by taking clip-in aluminum ceiling tile for example.

Basically there are two steps to manufacture the clip-in aluminum ceiling tiles.

Step 1. Sheet Cutting
The dimension of the material known as aluminum sheet would be 634*634mm or 654*654mm, it depends on a vary height of aluminum ceiling you want to produce. The aluminum sheet’s surface is pre-painted at material factory, you can customize into different colors or forms like plain or perforated.

Put the aluminum sheet on the mold which fixed on a 40 ton hydraulic machine to finish the corner cutting .

Step 2. Shape Forming

Same as the step 1, coming to this step, send the aluminum sheet to the mould which fixed onto the next higher 120 ton hydraulic machine to form the final shape. Check the finished corner to be formed as following.
Clip-in ceiling tiles install
After quality checking and packing into carton, the ceiling tiles can be delivered to your construction site or decoration place to install. Use the tee channel when install this clip-in aluminum ceiling tiles.

Previous : Soundproof a Room with a Aluminum Suspended Ceiling

Next : Kitchen Ceiling Ideas and Type of kitchen ceiling

600*1200diagonal perforated aluminium decorative ceiling

Jun .10.2023

aluminium honeycomb panel aluminium honeycomb ceiling

May .28.2023

aluminium honeycomb ceiling aluminium honeycomb panel

Aluminum Honeycomb ceiling, brand new building material

Apr .07.2023

aluminum honeycomb panels is suitable for building curtain wall exterior wall hanging panels, interior decoration projects, billboards, shipbuilding, aerospace manufacturing, indoor partitions and commodity display stands, commercial transport vehicles an

Aluminium honeycomb ceiling

Apr .02.2023

How is a Honeycomb Panel Produced?

The honeycomb panel is typically made up of 5 layers by sandwich lamination: facing skin, adhesive, honeycomb core, adhesive and back skin.
Materials with high tensile and compression strength are best suited to bein

Lucy Lu Lucy Lu Lucy Lu

Leave a message